Detailed Product Description

SP-02 Epoxy Mortar Floor Coating System

        Chemical, abrasion and impact resistance and compressive strength

        Highly durable surface suited for heavy traffic & aggressive use

        Slip-resistant texture for reduced injury risk on wet surfaces

        Ease of application, easy to maintain, seamless, hygienic surface

Whether you are overlaying new concrete or patching/overlaying a severely eroded concrete floor, SP-02 can be applied on a wide variety of substrates such as concrete, masonry, etc.

Industrial &manufacturing

chemical processing

food processing

manufacturing, heavy & light

automobile, motorcycle or elevator production

warehouse/distribution

Transportation

aircraft hangars

automotive dealerships

parking decks or garage

transportation terminals

vehicle maintenance areas

Commercial &Institutional

retail & shopping centers

schools/education facilities

sports & entertainment venues

Common areas

Aisleways/corridors

chemical areas

loading docks

mechanical rooms

Technical data

Application instruction

Surface preparation The compressive strength of the concrete substrate should not be less than 25N·mm^-2, the best application temperature is between 10~25.The air humidity must not be higher than 80%, the moisture content of the substrate shall not be higher than 8.Surfaces should be sound, clean, dry and free from loose particles, oil, grease, and all other contaminants. Clean oil, grease by special detergent, cement laitance, loose particles, pitch and other contaminants must be removed. The alkalinity and porosity of the surface must also be considered.

Primer  Seal the substrate using SP-01A as a primer. According to the oil absorption of substrate, a second sealer coat may be considered.

Mortar  Scrape SP-02 mortar composed of SP-04T: SP-62A: quartz sand=2:1:18~20.

Base Coat  Brush the base coat (SP-01A: SP-01B=1: 1) one or two layers.

Finish coat  Brush SP-01A as a varnish.

Pot life  0.5h at +25

Cleaner  Clean tools and equipments using a special detergent SP-01S before the coating curing.

Packaging

SP-04T:20 kg per drum

SP-62A:16 kg per drum

SP-01A: 15kg per drum

SP-01B: 15kg per drum

SP-01S: 15kg per drum

Shelf life

12 months stored in original container, at a dry enclosed place at temperatures between 15 to 35 without exposure to direct sunlight.

Health and safety information

Protective measures 

SP-02 contains certain chemicals which can cause skin irritation. Wear gloves, masks while handling the product, washing thoroughly after handling. Should skin contact occur, wash immediately with soap and water.

During application and curing in closed rooms, adequate fresh air ventilation must be provided. Keep away from open flames including welding.

In case of accidental eye contact, wash with a large quantity of water and immediately seek medical advice.

For detailed health, safety, environment recommendations, please consult and follow the instruction on the product material safety data sheet 

Disclaimer                 

The information given in this sheet is not intended to be exhaustive. Any person using the product without first making further written enquiries as to the suitability for the intended purpose does so at his own risk and we can accept no liability of the product for any loss or damage arising out of such use. The information contained product development. Product data are subject to change without notice and become void five years from the date of issue.

SP-02 is for professional use only.

ISSUED in May 2006