Detailed Product Description

SP-07/8 Anti-Electrostatic Epoxy Floor Coating System

SP-07/8 is a conductive & static dissipative epoxy floor coating system with the following properties:

       Outstanding static control

       Excellent mechanical strengths, and abrasion & chemical resistance

       Durable, easy-to-clean, yet beautiful finish

SP-07 can protect your work environment against destructive static shock, reduce costly damage, injury and downtime due to the electrostatic discharge (ESD). Reliability in high-sensitivity areas: 

       Manufacturing/processing with flammable or combustible substances

       Munition plants

       Clean rooms

       Facilities containing AGV lines

       Electronics manufacturing & assembly

       Computer facilities

       Facilities with highly sensitive

       Electronic equipment& synthetic fiber

Technical Data

Direction of Use

Surface preparation

      The compressive strength of the concrete substrate should not be less than 25N/mm², the best application temperature is between 10~25.The air humidity must not be higher than 80%, the moisture content of the substrate shall not be higher than 8.

      Correct substrate preparation is critical for optimum performance. Surfaces should be sound, clean, dry and free from loose particles, oil, grease, and other contaminants

      Clean oil, grease by special detergent. Cement laitance, loose particles, pitch and other contaminants must be removed from the surface by sand-blasting. The alkalinity and porosity of the surface must also be considered.

Primer  Seal the substrate by the anti-electrostatic primer: SP-07D: SP-07A=5:1.Channeling, Laying Copper WireEmbedding copper wire by the mortar: SP-07D: SP-07A: quartz powder=5:1:8.

Base Coat  Brush the base coat (SP-07B: SP-62A: SP-07S=4:1:2.) one or two layers.

Pot life 0.5h at +25C

Cleaner Clean tools and equipments using a special detergent SP-07S before the coating curing.

Packaging

SP-07 A: 15kg per drum

SP-07 D: 20kg per drum

SP-07 B: 20kg per drum

SP-62A: 16kg per drum

SP-07S: 15kg per drum

Shelf life

12 months stored in original container, at a dry enclosed place at temperatures between 15 to 35 without exposure to direct sunlight.

Health and safety information

Protective measures SP-07 contains certain chemicals which can cause skin irritation. Wear gloves, masks while handling the product, washing thoroughly after handling. Should skin contact occur, wash immediately with soap and water.

During application and curing in closed rooms, adequate fresh air ventilation must be provided. Keep away from open flames including welding.

In case of accidental eye contact, wash with a large quantity of water and immediately seek medical advice.

For detailed health, safety, environment recommendations, please consult and follow the instruction on the product material safety data sheet 

Disclaimer               

The information given in this sheet is not intended to be exhaustive. Any person using the product without first making further written enquiries as to the suitability for the intended purpose does so at his own risk and we can accept no liability of the product for any loss or damage arising out of such use. The information contained product development. Product data are subject to change without notice and become void five years from the date of issue.

SP-07 is for professional use only.

Issued in May 2006